OT security for machine builders

Service your machines anywhere. Open nothing.

A DIN-rail gateway that gives your engineers one encrypted, auditable way into a deployed machine — while the customer's network stays sealed. Built for the EU Cyber Resilience Act.

OTPLC · drives · sensorsVALLUMITplant uplinkoutbound encrypted tunnel →your service portalno inbound ports opened · no VPN appliance on the customer side
VG-1 · DIN-rail · 24 V DC · fanlessOT ⇄ IT isolatedSTATUS tunnel up
What it does

One box between the machine and the outside world.

It clips onto the DIN rail inside the control cabinet and takes two network connections — one to the machine, one to the plant uplink. From there it does three things.

01

Dials out, never in

The gateway opens an encrypted tunnel outward to your portal and holds it. Your engineers connect through that tunnel, per person, per machine, per time window — every session logged. The customer's firewall stays closed.

02

Speaks the shop floor

Modbus, OPC-UA, PROFINET and MQTT in; clean data out to your dashboards and maintenance systems — without exposing the controllers themselves to the network.

03

Stays patched for life

Signed firmware, remote updates and a documented vulnerability process over the product's lifetime. That continuity is the part of the CRA a one-off purchase cannot give you.

Why now

Cybersecurity stopped being optional. It became a condition of sale.

The Cyber Resilience Act applies to every product with digital elements placed on the EU market. Most mid-sized machine builders have no answer yet — and the answer is easier to buy as a component than to build as a project.

In force
NIS2 — operators of essential services must secure their OT networks.
Since 11 Sep 2026
CRA reporting obligations apply: actively exploited vulnerabilities and severe incidents must be notified.
11 Dec 2027
CRA fully binding — secure-by-design, SBOM and lifecycle vulnerability handling required.
The product

Vallum Gate VG-1

Design intent for the first unit. Specifications are being finalised with our manufacturing partner.

Vallum GateMODEL VG-1
Form factorFanless metal housing, DIN-rail mount
Power24 V DC industrial supply
Operating range-20 to +60 °C
Interfaces2× Ethernet — segregated OT / IT ports
ProtocolsModbus TCP · OPC-UA · PROFINET · MQTT
Secure accessOutbound tunnel only — no inbound ports opened
FirmwareHardened Linux · signed · remotely updatable
ManagementCentral portal — devices, access control, audit log
ConnectivityWired at launch · cellular option on the roadmap
—

Built by a security engineer

Hardened from the firmware up, not retrofitted onto a generic gateway. The software is where the value sits, and it stays in-house.

—

Assembled in Tunisia, duty-free to the EU

Under the EU–Tunisia association agreement: competitive cost, short lead times to Europe, no customs duty on entry to the single market.

—

Priced for the Mittelstand

Hardware plus a fair maintenance plan, at a figure a mid-sized builder can roll into every unit it ships.

Compliance

Stated honestly.

Vallum Gate is engineered against the frameworks below. These are targets and work in progress — not certifications already held.

CEEMC, Low Voltage and RoHS — mandatory to place the product on the EU market.In progress
IEC 62443-4-2Component security for industrial automation systems.Target SL2
CRASecure-by-design, SBOM and lifecycle vulnerability handling.By design
NIS2Helps operators meet their OT network-security obligations.Supports
Get in touch

Looking for pilot partners.

If you build machines and your customers are starting to ask how you will meet the CRA, we would like to talk — early pilots shape what the first unit becomes.

hello@vallumgate.com